Owner manual

Hardware Replacement
7.5 ReplacingtheCompleteFront
The following is needed:
• Anewfront,seeAvailable Spare P arts for iX Panel T60
• AtorxT10screwdriver
Note:
MakesuretouseadequateESDprotection.
Follow the steps below to replace the complete front of the iX Panel T60:
1.
Power off the operator panel.
2.
Follow the steps 1-6 in the Replacing the Display/Display Cable instructions .
3.
Attach the new front.
4.
Re-assemble the unit.
BeijerElectronics, MAEN005
24