User Manual

Tech n ical Data
Mitsubishi Electric, MA00856 13
3.1.1 On Screen Menu Descriptions
This section describes the accessible sub menus and their functions.
Note:
The menus Picture and Function are not accessible in DVI-mode.
Main Menu Sub Menu Function
Color Contrast Adjust contrast. (Analog RGB only)
Brightness Adjust screen brightness
Gamma RGB gain option
Color Temp User: Red, green and blue colors can be adjusted
Warm: Red-tinged screen
Normal: Green-tinged screen
Cool: Blue-tinged screen
Color Adjust If User is selected under Color Temp, the colors can
be adjusted individually
Exit Exit to main menu
Main Menu Sub Menu Function
Picture H.Position Move screen horizontally
V.Position Move screen vertically
Phase Used to adjust the phase of the screen when noise or
overlapped lines are shown on the screen
Clock Adjust horizontal size of the screen by increasing or
decreasing the number of picture elements
Sharpness Adjust sharpness of pictures in 5 levels
Exit Exit to main menu
Main Menu Sub Menu Function
Function Auto
Adjust
Auto configuration of geometry.
Clock and Phase are adjusted and position is centered
Auto Color Automatic color adjustment
Exit Exit to main menu