Technical data

brixlelektronik

...we got the solution

–bc-12er 12 channel receiver bc-20 plus 20 channel receiver

EIN Zeit/Nachlauf Used with AUS/Zeit for flash options.

[On time] If AUS Zeit/Pause is defined this option will set the

on-time of the output. If AUS/Zeit is set to 0 this

value will define the time the output will remain on

after the input device is set to off.

To simulate a double or triple flash (emergency

vehicles) choose either 2Blitz or 3Blitz. These

options will appear if values below 0 will be

chosen. The time between the double or triple f

lash will be defined with AUS/Zeit.

AUS Zeit/Pause Defines the OFF time in between flashes. 0 is

[Off time/Pause] permanent on.

Funktion: Blinker Links [Feature: Indicator Left]

This feature defines the settings for the output of an indicaor on the left side

Senderkanal A-z Defines the input device of the tranmitter (Stick, switch,

[Input device] etc.)

Einschaltwert Defines the status of the output when the module is

[Default value power on] powered up

Warnbl. Hazard lights (both indicators on)

[Hazard lights]

Links Left indicator on

[Left]

Rechts Right indicator on

[Right]

AUS Both indicators off

[Off]

Ausschaltwert Defines the status of the output when the module is

[Switch off value] in park mode