Technical data

brixlelektronik ...we got the solution
–bc-12er 12 channel receiver bc-20 plus 20 channel receiver
Funkabrisswert Defines the status of the output device when the signal is
[fail safe] lost or the transmitter is switched off
Gemerkt Last status of the connected device before
[Memory] switched off
Ein Output is on (Hi 3.3V)
[on]
Aus Output is off (Lo 0V)
[off]
Ebeneschalter A-z Defines the input device on the transmitter that
[Level control] enabled/controls the different levels
Ebenenestellung Defines on which level this output will work
[Level assignment] (use 3 position switch for proper control of the levels)
E+ 0+ A+ works on all levels
E- 0- A+ works just in the upper level(switch up)
E- 0+ A- works just in the mid level(sw. Mid position)
E+ 0- A- works just in the lower level (switch down)
Gegenläufig Nein Normal
[Reverse] [no]
Ja/Invers Feature inverted
[Yes/Reverse]
Ausgabeart EIN AUS % Defines switching points for on and off if a stick or
[Definition of switch] pot is used to control this output
Memory Ein Momentary switch moved to EIN (down) toggles
[Memory on] output
Memory Aus Momentary switch moved to AUS (up) toggles
[Memory off] output
EIN 0 AUS Switch position defines output
[On 0 Off]
SchaltPunkt EIN -100..+100 Defines stick/pot position for ON(do not use 50%)
[Switching point ON]
Schaltpunkt AUS -100..+100 Defines stick/pot position for OFF(do not use 50%)
[Switching point OFF]
Bei Stellung AUS Aus/Ein Defines output in AUS (up) position of switch
[Switch position up] [on/off]
Bei Stellung 0 Aus/Ein Defines output in mid position of switch
[Switch mid position] [on/off]
Bei Stellung EIN Aus/Ein Defines output in EIN (down) position of switch
[Switch position dowen] [on/off]
23.06.14 Vxx417