Technical data

brixlelektronik

...we got the solution

–bc-12er 12 channel receiver bc-20 plus 20 channel receiver

Switch 2 E(down) = Exit 4

USM-RC-2 Beier Soundmodule (please note sequence of the switches)

Switch 1 A(up) = Switch 8 up

Switch 1 E(down) = Switch 8 down

Switch 2 A(up) = Switch 7 up

Switch 2 E(down) = Switch 7 down.....

Schalter 1..8 A..z Which input device shall be used „-“ deactivated

[Switch]

Ebenenschalter A..z Defines the input device on the transmitter that

[Level control] enables/controls the different levels

Ebenenestellung Defines on which level this output will work

[Level assignment] (use 3 position switch for proper control of the levels)

E+ 0+ A+ works on all levels

E- 0- A+ works just in the upper level(switch up)

E- 0+ A- works just in the mid level(sw. Mid position)

E+ 0- A- works just in the lower level (switch down)

Funktion: Licht/LED [Feature: Light/LED]

Senderkanal A-z Defines the input device of the tranmitter (Stick, switch, etc)

[Input device]

Einschaltwert Defines the staus of the output when the module

[Default value power on] is powered up

Gemerkt Last status of the connected device before

[Memory] switched off

Ein Output is on (Hi 3.3V)

[on]

Aus Output is off (Lo 0V)

[off]

Ausschaltwert Defines the status of the connected device during park