Technical data

brixlelektronik ...we got the solution
–bc-12er 12 channel receiver bc-20 plus 20 channel receiver
[..Signal off]
Offset li -125%..+125% Defines the offset of the connected device on the
[offset left] right side
Offset re -125%..+125% Defines the offset of the connected device on the
[offset left] right side
Multip. li 0.2..2.00 Stick movement multiplied with Multip.li is
[Multiplier left] movement of the connected device on the left side
Multip. re 0.2..2.00 Stick movement multiplied with Multip.re is
[Multiplier right] movement of the connected device on the right
side
Maximalwert -100..125% Maximum output value for the conncted device
[max. value]
Minimalwert -125..100% Minimum output value for the conncted device
[Min.value]
Schnelligkeit 0.01..100 Maximum speed of the signal change for the
[Speed] connected device. Controls servo/esc speed.
Funktion: Raupe rechts [Feature: Track mixer right]
With this feature the second output for the track mixer will be defined
Raupe links ist 1..12 Track mixer left is defined on output ?
[Track mixer left]
Gegenläufig Nein Normal movement of connected device
[Reverse] [no]
Ja/Invers Reverse movement of connected device
[Yes/Reverse]
..+SigAus Signal will be switched of after 10 sec downtime
[..Signal off] (no change of position of input device)
Funktion: Nautic/Multiswitch [Feature: Nautic/Multiswitch]
Nautic or multiswitch modules compatible to the Robbe®/Futaba® standard can be
controlled with this feature. (like GEWU® GMS16R, Beier Soundmodule, Wedico®)
GEWU®
Switch 1 A(up) = Exit 1
Switch 1 E(down) = Exit 2
Switch 2 A(up) = Exit 3
23.06.14 Vxx417