Technical data

brixlelektronik ...we got the solution
–bc-12er 12 channel receiver bc-20 plus 20 channel receiver
Ausschaltwert Defines the position of the connected device
in park mode
halten Current position will be held
[hold]
1..6 Set position
Funkabrisswert Defines the position of the connected device when the
[Fail safe] signal is lost or the transmitter is switched off
halten Current position will be held
[hold]
1..6 Set position
G.Position 1..6 -125..+125 Defines the 6 available positions for the connected
[Gear position] device
Funktion: 6Gang erweitert [Feature: 6 speed gear extended]
This feature can be linked to the previous feature to add an additional output
device. e.g. 2 servos can control one 6 speed gearbox.
Bezugskanal 1..12 6 speed gear is on out put 1..12.
[linked, origin channel for the 6 speed gear]
G.Position 1..6 -125..+125 Defines the 6 available positions for the linked
[Gear position] connected device
Funktion: Raupe Links [Feature: Track mixer left]
With this feature you can control tracked models or models with one motor per side
like a standard model. This is the feature for excavaors or dozer to be controled in
the same way as you are used to control your truck. One stick controls
forward/backward and one stick controls the direction.
Gaskanal A..z:a..z Defines the input device of the tranmitter (Stick, switch, etc)
[motor control] for the forward/backward movement
Einschaltwert Defines the position of the connected device when the module
[Default value power on] is powered up.
Gemerkt Last position of the connected device before
[Memory] switched off
kein Sig. No servo signal send to the connected device
[no signal]
+/- 125% Connected device will be set to the programmed
position
23.06.14 Vxx417