Technical data

GB Sound module USM-RC
4 BEIER-Electronic 28.07.2008
Technical Data
Supply Voltage (U
b
): 5 – 14V DC
Power consumption: Standby-current: ca. 30mA
Operation (only sound): max. 0,4A
Operation (sound + switching outputs):
max. 2,5A
Switching-inputs: 5 pieces
LO-Signal = U < 2V
HI-Signal = U > 5V
Integrated pull-up resistors (4k7/10k)
Switching-outputs: 7 pieces max. 0,3A (npn – open collector)
- 2 mulitfunctional outputs
- light
- reverse drive light
- stop light
- indicators (left and right) / hazard warning
light
Proportional Inputs: 4 pieces
Voltage inputs for drive speed: 0 – 14V DC
Audio amplifier: max. 3W
Recommended loudspeakers:
at U
b
5,0 – 9,6V: 8 – 16Ω (3 – 20W)
at U
b
9,6 – 14,0V: 16 – 32Ω (3 – 20W)
Volume control: By external potentiometer (100kΩ) and/or
remote control possible
Memory for sound files : 4MB Flash (32MBit)
Max. length for the sounds: 380 seconds (at 11kHz)
Supported sound files: WAV-format, 8 bit, mono, 11kHz or 22kHz
Sound output: 12 bit D/A-converter
Number of possible sounds: 75 for driving noise in full load
75 for driving noise in partial load
1 turn on noise (automatic)
1 turn off noise (automatic)
1 starting noise (automatic)
1 stopping noise (automatic)
1 idling noise (automatic)
1 brake noise (automatic)
1 reverse driving noise (automatic)
4 additional sounds (via inputs)
12 additional sounds (via prop.-channels)
8 random sounds (random generator)
Random generator: Times between 1 to 250s adjustable
Interface: USB 2.0 Mini A
Permissible ambient temperature: 0 – 60°C
Permissible relative air humidity: max. 85%
Measurement: 67 x 44 x 16 mm