Technical data

GB Sound module USM-RC
28.07.2008 BEIER-Electronic 35
Firmware update
Also the firmware (the internal software) of the sound module can be updated by the
USM-RC Sound-Teacher
With the menu Datei Æ Firmware aus dem Internet laden can be checked whether
a new firmware (e.g. with new functions) for the USM-RC sound module is available.
You can download these from our internet page to your hard disk.
The firmware update is uploaded to the sound module by the USB cable. Connect
the sound module with the USB-cable to your PC. An external power supply isn’t
necessary.
With the menu Datei Æ Firmwareupdate durchführen you can start the update. At
first the version of the firmware is read out from the sound module and shown. Now
you select the new firmware (.bin file) on your hard disk, which should be uploaded to
the sound module. After loading the firmware file, the update is started by a click on
the „Yes"-button.
Now the sound module may not be disconnected from the USB cable! The pure
update takes now about 5 seconds. After this, the sound module can be used with
the new firmware as usual.