Technical data

GB Sound module USM-RC
32 BEIER-Electronic 28.07.2008
Configuring the sound module
To make different settings on the sound module, please click in the menu
„Konfiguration” on „Konfiguration ändern”.
A new window is opened, in which different settings can be done..
“Soundmodul-Konfiguration”
Here is defined, whether the module should works in the digital or analogous
operation mode (see page 5).
Here is also defined, whether the model has 1 or 2 driving motors.
You have here the option to deactivate the special functions of the proportional
channel #4 (driving sound on/off and volume control).
“Bremsempfindlichkeit”
Here are 2 thresholds which are responsible for the brake recognition.
The threshold for the braking noise (sound #9) determines how strong the vehicle
must be slowed down, so that the brake noise is played.
The threshold for the stop light determines how strongly the vehicle must be slowed
down, so that the stop light lights.
The higher the thresholds are set, the more strongly must be slowed down, to
activate these functions.
“Teillast”
With the 2 thresholds for partial load on and partial load off, will be configured how
strongly the speed must be changed, that between full load (sound #4) and partial
load (sound #5) is switched over.