Technical data

GB Sound module USM-RC
28.07.2008 BEIER-Electronic 31
Beschreibung
A description of the Sound in this slot.
Ausgelöst durch
Shows how the sound can be started.
Löschen
With this button the current sound file will be deleted.
Datei
Path and filename of the WAV-file, which is stored in this
slot.
Sound-Länge
Length of the current sound in seconds.
Sample-Rate
Quality of the current sound.
Speicherbelegung
Shows you how much memory usage is needed in %.
Sound öffnen
With this button a new sound file can be loaded into the slot
Anhören
Playing the current sound over the PC-loudspeakers.
Therefore a soundcard in the PC and connected
loudspeakers are needed.
Ausgänge
Configure which outputs were activated by playing the
current sounds.
Opening of sound files
With a click on the button, the Windows usual “file open dialog” opens, in
which you can select the wanted sound file on your hard disk.
All WAV-files with following properties can be opened:
• 8 bit
• mono
• 11,025kHz or 22,050kHz
If you want to open a file, which is not in the necessary format, an error message
appears. To be able to use this file, you have to convert it with a suitable program.
How this works, is explained in an example on page 36Fehler! Textmarke nicht
definiert..
We recommend, to store all sound files for a complete project, in an own separate
folder on your hard disk.
“Speicherbelegung” indicates how much memory is
already occupied in the sound module.
After all wanted sound files were assigned to their slots and the module was
configured, it is recommended to save the complete project (Datei Æ Projekt
speichern).
If you would like to delete a sound in a slot, select the slot, and click simply on the
button
.
In the folder „Sounds" on the CD you will find some example sounds.
In addition there are examples for different driving noises in the folder „USM-RC
Sounds".