Technical data

GB Sound module USM-RC
28.07.2008 BEIER-Electronic 29
USB-Driver installation
Before you start the USM-RC Sound-Teacher, the USB driver for the sound module
should be installed first.
Connect the USB cable to a free USB port (1.0, 1.1 or 2.0) of your computer, and put
the other end into the USB socket on the sound module. A further voltage supply is
not necessary, because the sound module gets his power directly from the USB port.
The new sound module is recognized by the automatically hardware recognition and
Windows starts the hardware assistant. This looks a little different at the different
operating systems and languages, but it always run in a similar way. It is only
important that the supplied CD-ROM is in a CD/DVD-drive.
Now you can basically click always on „continue" until the driver installation is
finished.