Technical data

GB Sound module USM-RC
28.07.2008 BEIER-Electronic 27
Output #6 (Indicator left)
To switch the indicator on or off, the stick of proportional channel #2 must be put very
shortly in position A.
In the analogous operation the indicator is switched by the switching-input X1/9.
Output #7 (Indicator right)
To switch the indicator on or off, the stick of proportional channel #2 must be put very
shortly in position D.
In the analogous operation the indicator is switched by the switching-input X1/10.
Hazard warning light
To switch the hazard warning light on or off, the stick of proportional channel #2 must
be put for at least 2,5s into position D. In the analogous operation the two switching-
inputs X1/9 and X1/10 must simply be activated.
If the hazard warning light is turned on, the left and the right indicators are flashing.