Technical data

GB Sound module USM-RC
18 BEIER-Electronic 28.07.2008
Stick simulation with switches
To use all functions of the proportional
channels #2 - #4 conveniently, you can
simulate the different potentiometer
positions of a stick, through a simple
keystroke. If you press the key S1, a stick
position is simulated for position A.
Often the available sticks are already
reserved by other functions, but the remote
control has still other free channels. This
schematic can be used for the further
channels to activate the additional sounds.
You need only 6 resistors and 4 switches for
this per channel.
With the indicated resistors values, this
schematic should work with all standard
remote controllers. If needed, you can also
configure the thresholds of the 5 areas in the
Sound-Teacher.
How and where this schematic is connected
in the remote control, is unfortunately always
a little different according to manufacturer
and model.