Technical data

GB Sound module USM-RC
28.07.2008 BEIER-Electronic 17
Assignment of channel #4:
Position Function
short (0,5-1,0s) in position long (>2,5s) in position
A additional sound 5 (#18) volume control on
B additional sound 7 (#20)
C additional sound 8 (#21)
D additional sound 6 (#19) engine sound on/off
The functions which are here described, do not have to be used all of them. It is only
supposed to be represented in this overview, what with the channels #2 - #4 can be
done.
In order to activate the additional sound 5 for example, the stick of proportional
channel #4 must be brought from center position N to position A. This movement
should be done quite fast (< 0, 5 s), because the movement of the stick goes also
through the area B. If you move the stick too slowly, also the additional sound 7
would be played.
Neutral position
You can configure in the Sound-Teacher, whether the neutral position of the 4 sticks
should be read in automatically after switching on the power supply of the sound
module, or whether the neutral position is put on the usual default value (1,5ms)
firmly.
If the automatic neutral position search is used, pay attention that the sticks are really
in neutral position, during the switch-on of the sound module!