Technical data

GB Sound module USM-RC
16 BEIER-Electronic 28.07.2008
Threshold 1
Threshold 2
Threshold 3
Threshold 4
N
C
B
A
D
Neutral position(1,5ms)
(1,0ms)
(2,0ms)
(0)
(20)
(20)
(60)
(60)
(100)
(100)
Functional assignment at proportional channels #1- #4
The proportional channel #1 is responsible only for the speed recognition. The other
3 channels have several functions. If channel #2 is used also for the speed
determination, the other functions (light, indicators, additional sounds 9-12) are not
available.
To occupy the proportional
channels #2 - #4 with several
functions, these channels are split
into the 5 areas "A, B, N, C and D
". These areas represent the
possible positions of a stick.
The area N is the neutral position
that is the center position of the
stick.
The same principle is valid also for
a horizontal stick. The area A is in
this case to the left and area D to
the right.
The areas can also
adjusted/optimized to your remote control, by setting the 4 thresholds in the USM-RC
Sound-Teacher.
Assignment of channel #2:
Position Function
short (0,5-1,0s) in position long (>2,5s) in position
A
additional sound 9 (#22)
indicator left on/off
light on/off
B additional sound 11 (#24)
C additional sound 12 (#25)
D
additional sound 10 (#23)
indicator right on/off
hazard warning light on/off
Assignment of channel #3:
Position Function
A additional sound 1 (#10 - #12)
B additional sound 3 (#16)
C additional sound 4 (#17)
D additional sound 2 (#13 - #15)