Technical data

D Sound module USM-RC-2
32 BEIER-Electronic 01.03.2012
completely, and then it stops.
Loop / immed. stop When the sound is started, it is played again and again
from start to finish in an endless loop. To switch the
sound off it must be virtually “started” again. The sound
then stops immediately.
Triggering with the proportional channels #2 - #4 (as static configured), the
nautic-mode or the switching-inputs:
Mode Function
Once / complete When the sound is started, it is played exactly once,
from start to finish, and then it stops. It is not possible to
halt the sound prematurely; it is always
played
completely.
Once / immed. stop When the sound is started, it is played exactly once,
from start to finish, and then stops. However, if the input
is switched off while it is still running, the sound is then
stopped immediately.
Loop / complete When the input is switched on, the sound is played again
and again from start to finish in an endless loop. If the
input is switched off again, the sound runs from start to
finish once more completely, and then stops.
Loop / immed. stop When the input is switched on, the sound is played again
and again from start to finish in an endless loop. If the
input is switched off again, the sound then stops
immediately.