Manual

7230 Hollister Avenue, Goleta, California 93117 | Tel: [phone] | Fax: [phone] | www.beisensors.com
11
Specication No.: 02135 Rev: 5-23-2013
PHD User Manual
5. Rotate the part in the appropriate direction (In this example Counter Clockwise) as selected
in the “Rotation Direction” eld to the next programming point, Point B and click “Program B”
without moving the part from the desired position.
6. If you have selected something other than a “2 Points” programming option, repeat steps
4 & 5 for the remaining points. Otherwise, you may release the part and click “Finalize
Programming” to nish the programming process.
7. You may now repeat the process for the other sensor. The procedure is the same if you have
selected “Synchronous Programming”.