Owner manual

PHO5
BEI Sensors SAS
Espace Européen de l’Entreprise
9, rue de Copenhague
B.P. 70044 Schiltigheim
F 67013 Strasbourg Cedex
Tél : [phone]
Fax : [phone]
Mail : [e-mail]
Web :
www.beisensors.com
ABSOLUTE MULTITURN ENCODER, PHO5 RANGE
ELECTRICAL CHARACTERISTIC
Input signal clock CLK per opto-coupler Power supply 5 – 30Vdc
Output signal DATA line - driver RS422 Introduction < 1 s
Clock frequency CLK 100kHz – 500kHz Cons. Without load < 100mA (typically 50-60mA at 24Vdc)
Precision ± ½ LSB (13 bits) Position refresh < 200µs
SSI TRANSMISSION
Transmission Transmission up to 400m* at 100kHz in function of the cable characteristics
Cable High security of transmission by using shielded twisted pair cable
Consult us for length > 100m
SSI CONNECTION (TYPE S6 : BEI IDEACOD STANDARD)
Type Vcc Gnd Clk+ Data+ RAZ Data- Clk- DIRECTION
S6 1 2 3 4 5 6 7 9
S8 8 1 3 2 6 10 11 5
Note : Do not connect other pinouts, connect DIRECTION and RAZ to a potential (RAZ at 0V if not used)
ORDERING REFERENCE (Contact the factory for special versions, ex: special flanges, connections, electronics…)
Shaft 
Supply
Output
stage
Code Resolution Connection Orientation
13 B12 D5
Resolution Nb of turn Nb data
PHO5
14 : 14mm
Nota:
reduction
hubs
available
P : 5 to
30Vdc
SS : SSI
without
parity
B: binary
G: Gray
13: 13 bits B12: 12 bits D5: 25 bits
S6 : M23 12pins CW
for SSI transmission
S8: M23 12pins
CCW for SSI
transmission
R : radiale
PHO5 _ 14 // P SS G // 13 B12 D5 // S6 R
Made in FRANCE
Changes possible without further notice - Version 2.0