Owner manual

MHM5
BEI Sensors SAS
Espace Européen de l’Entreprise
9, rue de Cohague
B.P. 70044 Schiltigheim
F 67013 Strasbourg Cedex
Tél : [phone]
Fax : [phone]
Mail : [e-mail]
Web :
www.beisensors.com
DEVICE NET ABSOLUTE MULTI-TURN ENCODER, MHM510-DNET RANGE
 MHM510-DEVICE NET, standard encoder Ø58mm with DeviceNet interface:
 Robust and compact design
 Solid shaft version Ø 10 mm (06 mm available upon request)
 Precision ball bearings with sealing flange
 High temperatures performances –40°C … +85°C
 Code disc made of unbreakable and durable plastic
 Mechanical memorisation of the number of turns by gears
 Resolution : 13 bits = 8192 steps/turn (max 16 bits)
 Number of turns : 12 bits = 4096 turns (max 14 bits)
 Polarity inversion and short circuit protection

Highly integrated circuit in SMD-technology
MHM510-DNET (connection cap included)
Err - Green LED Sta - Green LED Meaning
off off No power supply
off on
Encoder is ready, Boot Up message not sent (no further device on
network, wrong baud rate) or encoder in prepared status
flashing on Boot Up message sent, device configuration is possible
on on Normal operation mode, Encoder in Operational Status
MECHANICAL DATA
Status visualization by 2 LED’s at the back of the connection cap
Cover : aluminum Vibrations (EN 60068-2-6) ≤ 10 g (10Hz… 1 000Hz)
Body : aluminum Weight 600 g
Material
Shaft: stainless steel Operating temperature - 40 … + 85°C
Axial : 40 N Storage temperature - 40 ... + 85°C
Max. shaft loading
Radial : 110 N
Humidity
98 % without condensation
Shaft Inertia ≤ 30 g.cm² IP65: cover
Torque ≤ 3 N.cm
Protection class (EN 60529)
IP64: flange
RPM (continuous operation)) 6 000 tr/min Lifetime in 10
8
revolutions with F
a
/ F
r
(axial / radial)
Shock (EN 60068-2-27)) ≤ 100 g (halfsinus, 6 ms) 40 N / 60 N 40 N / 80 N 40 N / 110 N
Shock (EN 60028-2-29) ≤ 10 g (half-sinus, 16ms) 25 10 4
Changes possible without further notice - Version 2.0