Manual

MHK5
BEI Sensors SAS
Espace Européen de l’Entreprise
9, rue de Copenhague
B.P. 70044 Schiltigheim
F 67013 Strasbourg Cedex
Tél : [phone]
Fax : [phone]
Mail : [e-mail]
Web :
www.beisensors.com
DEVICE NET ABSOLUTE MULTI-TURN ENCODER, MHK515-DNET RANGE
MHK515-DNET, standard encoder Ø58mm with DeviceNet interface:
 Robust and compact conception
 Blind shaft version Ø 15 mm (reduction ring available)
 Precision ball bearings with sealing flange
 High temperatures performances –40°C … +85°C
 Code d
isc made of unbreakable and durable plastic
 Mechanical memorisation of the number of turns by gears
 Resolution : 13 bits=8192 steps/turn (max 16 bits)
 Number of turns : 12 bits=4096 turns (max 14 bits)
 Polarity inversion and short circuit protection
 Highly integrated circuit in SMD-technology
MHK515-DNET (Connection Cap included)
Shaft diameter can be reduced at 12mm, 10mm or 8mm by reduction ring (by slipping them into the hollow shaft)
Status indication with two LED’s in the connection cap
Err - Green LED Sta - Green LED Meaning
off off No power supply
off on
Encoder is ready, Boot Up message not sent (no further device on
network, wrong baud rate) or encoder in prepared status
flashing on Boot Up message sent, device configuration is possible
on on Normal operation mode, Encoder in Operational Status
MECHANICAL DATA
Allowed shaft
movements
axial radial
static ± 0.3 mm ± 0.5 mm
dynamic ± 0.1 mm ± 0.2 mm
Cover : aluminum Shocks (EN 60068-2-27) ≤ 100 g (half sine, 6 ms)
Body : aluminium Perm. shocks(EN 60028-2-29) ≤ 10 g (half sine, 16ms)
Material
(option stainless steel )
Shaft: Stainless steel Vibration (EN 60068-2-6) ≤ 10 g (10Hz… 1 000Hz)
Axial : 40 N Weight (Aluminium Version) 600 g
Max. shaft loading
Radial : 110 N Operating temperature - 40 … + 85°C
Shaft Inertia ≤ 30 g.cm² Storage temperature - 40 ... + 85°C
Torque ≤ 3 N.cm Humidity 98 % without condensation
Speed (continuous) 6 000 RPM Protection (EN 60529) Cover: IP65, Shaft: IP64
Changes possible without further notice - Version 2.0