User Manual

ManualsBrandsBEI Sensors ManualsToolsHeavy Duty Inclinometers

HEAVY DUTY INCLINOMETER

ANALOG & RS232 I NTER FACE

The Heavy Duty inclinometers are robust inclination sensors specially designed for applications involving

rough handling and exposure to rigorous conditions. The die cast aluminium housing and the metal

connector enhance the mechanical strength of the sensor and make it ideal for heavy duty usage.

Main Features

− Dual Axis Inclinometer ± 80°

− Single Axis Inclinometer 360°

− High Resolution: 0.01°

− Accuracy: 0.1°

− Die-cast Aluminium Alloy Housing

− Digital Interface: RS232, Code ASCII

− Analog Interface: Voltage, Current

− High Protection Class: IP 69K, IP68, IP67

Electrical Features

− Highly Integrated Circuit in SMD-

Technology

− Polarity Inversion Protection

− Over-Voltage-Peak Protection

Programmable Parameters

− Preset

− Baud Rate

− Software Filters

− Resolution

− Analog Teach-in

Applications

− Measurement of Inclinations and Rotational

Movements

− Construction Machines

− Cranes

− Mobile Platforms

− Marine & Offshore Machinery

Summary of content (10 pages)

PAGE 1
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE The Heavy Duty inclinometers are robust inclination sensors specially designed for applications involving rough handling and exposure to rigorous conditions. The die cast aluminium housing and the metal connector enhance the mechanical strength of the sensor and make it ideal for heavy duty usage. Main Features Programmable Parameters − Dual Axis Inclinometer ± 80° − Preset − Single Axis Inclinometer 360° − Baud Rate − High Resolution: 0.
PAGE 2
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE Technical Data Electrical Data Model INC-080 INC-360 Measurement Range ± 80° 360° Number of Axes 2 1 Voltage 0.5 to 4.5 V , 0° = 2.5 V Load ≥ 10 KΩ with 12 VDC 0.5 to 4.5 V , 0° = 0.5 V Load ≥ 10 KΩ with 12 VDC Current 4 mA to 20 mA , 0° = 12 mA 1 Load ≤ 270 Ω 4 mA to 20 mA , 0° = 4 mA 1 Load ≤ 270 Ω Analog Interface Digital Interface RS232 (ASCII Format) Baud Rate Max. 115200 Baud (Programmable) Resolution 0.
PAGE 3
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE Environmental Conditions Operating Temperature -40 °C to +85 °C / -40 °F to 185 °F Humidity 98 % Relative Humidity, Non-Condensing Protection Class (EN 60529) IP 69K (With Appropriate Counter Connector), IP68, IP67 MTBF Data Failure Rate [FIT] 759 MTBF [Hours] 1,317,822 MTBF [Years] 150 The data mentioned above were calculated for electronics under the following conditions: SNA: Non-mobile operation Tu: 40°C - Mean component of ambient temper
PAGE 4
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE Programmable Parameters The parameters of inclinometer can be re-configured using the RS232 interface . Additionally Preset can also be done through a (soon to be available) Analog Teach-in. (Refer User Manual for additional information). Modes of Operation Can be switched between Polled Mode or Continuous mode. Baud rate The Baud rate can be programmed to lie between ranges of 2400 Baud and 115200 Baud.
PAGE 5
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE Mechanical Drawing – Heavy-Duty Housing Dimensions in mm and [inches] For more detailed drawings please refer website.
PAGE 6
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE Measurement Axes INC-080 – Dual Axis Inclinometer INC-360 – Single Axis Inclinometer Page 6 Analog Heavy-Duty Data Sheet Version: 20130507
PAGE 7
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE Pin Assignment The inclinometer is connected via an 8 pin M12 A-coded round connector. (Standard M12, Male side at sensor, Female at connector counterpart or connection cable).
PAGE 8
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE INC 80 – X-Axis Voltage Output INC 80 – Y-Axis Voltage Output Page 8 Analog Heavy-Duty Data Sheet Version: 20130507
PAGE 9
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE Current Output INC 80 – X-Axis Current Output INC 80 – Y-Axis Current Output Page 9 Analog Heavy-Duty Data Sheet Version: 20130507
PAGE 10
HEAVY DUTY INCLI NO ME TER ANALOG & RS232 I NTER FACE INC 360 - Current Output Models/Ordering Description Description Type key INC- XXX- Range 360° (1 axis) ± 80° (2 axis) 360 080 Number of axis One for 360° Version 1 Two for ± 80° Version 2 Interface X- XXX- RS232 + Voltage 0.5 to 4.