User Manual

53
BOM
SRPT-40A/450
705-ST40A-4
Part Des-
ignator
Part Description Manufacturer Manufacturer
Part #
MARTI
Part #
SRPT-40A Mainframe 700-250-41A
Top Panel Vender Assembly 700-250-40P
Screw, 6-32 x 1/4" phillips pan head (14) 500-183
BOM
SRPT-40A MAINFRAME
700-250-41A
Part Des-
ignator
Part Description Manufacturer Manufacturer
Part #
MARTI
Part #
Bottom Panel Vender Assembly 700-250-41P
Back Panel Assembly 700-250-43A
Screw, 6-32 x 1/4" phillips pan head (6) 500-183
Front Panel Assembly 700-250-42A
Screw, 6-32 x 1/4" phillips pan head (4) 500-183
Transmitter Synthesizer Assembly – 150 band 800-375AT150
Transmitter Synthesizer Assembly – 450 band 800-375AT450
Spacer, 4-40 x 1/2 hex threaded insulated (4) 513-040
Screw, 4-40 x 1/4" phillips pan head M/S Ni. (4) 500-004
Lockwasher, #4 internal tooth small pattern z (4) 500-055
SRPT-40 Audio Board 800-166AS
Spacer, #6 x 1/4 round (2) Keystone 1457A 513-019
Screw, 6-32 x 3/8" phillips pan head (2) 500-192
SRPT-40A Audio Regulation Board 800-168-40A
Sil Pad TO220 .75 x .5" ADHSV Berquist 3223-07AC-58 DB68027
Washer, TO-220 Shoulder NYL Thermalloy 7721-7PPS DB61024
Screw, 4-40 x 1/4" phillips pan head M/S Black 500-180
Kepps nut 4 x 40 zinc 4CNKEOZ 500-199
Screw, 4-40 x 1/4" phillips pan head M/S Blk (2) 500-180
ONLY ONE OF THE FOLLOWING TWO
POWER SUPPLIES IS USED DEPENDING ON
VERSION SRPT-40A
Power Supply, Switching 15V, 10 Amp Mean Well S-150-15 800-383A
Power Supply TEK150S00-XXX for SRPT-40 IPS UL200-13 800-324A
Screw,4MM x 5MM Phillips Pan Head MS (4) 500-225
Lockwasher,4MM Split (4) 500-226
Solder Lug, #6 (2) Concord 707-1406 512-009
Screw, 6-32 x 3/8" phillips pan head (2) 500-192
Keps nut 6 x 32 zinc 6CNKEOZ (2) 500-200
Wire Clip on Adhesive Base Richco #WCB-250- 510-279