User Manual

2
Model SRPT-40A
Remote Pick-Up Broadcast Transmitter
SPECIFICATIONS & ORDERING
Frequency Bands and
Maximum Output Power:
See ORDERING INFORMATION below.
Frequency Resolution:
12.5 or 10.0 KHz steps (user selectable)
RF Connector:
Type N-Female
Operating Temp. Range:
-10 Cº to +45 Cº
Modulation (Specify):
10KOF3E
25KOF3E
50KOF3E
FCC Frequency Group P
FCC Frequency Group K, L, N2
FCC Frequency Group N1, R
Or special order
Preselect Storage
Channels:
Can store and recall up to 10 frequency channels.
Frequency Stability:
Mobile: .00025%
Base: .00025%
Spurious Emissions:
Less than 60 dB
Audio inputs:
Four balanced microphone (150 ohms) inputs (XLR-3) with
mixing controls. One input switchable to balanced line level
at microphone #4 input and D connector on rear panel.
Modulation Control:
Broadcast-quality compressor/limiter built in.
Encoding:
Subaudible 27 Hz. tone encoder built in.
Metering/Indicators:
Illuminated meter indicates forward and reverse power, PA
current, B+, and audio compression. LEDs indicate
transmit, AFC lock, high VSWR, and temperature.
Controls:
(4) INPUT LEVEL, METER control knob, ENCODE
switch, FREQUENCY SELECT switches, EXECUTE
switch, POWER ADJUST pot, TRANSMIT switch, and
MONITOR jack.
Power Requirements:
90 to 264 VAC, 50/60 Hz
DC operation on 12 - 15 volts or 15 – 30 volts.
Accessory Connector:
15-pin D connector for DC power, remote control, encode,
line level input.