Maintenance Manual

Table Of Contents

• Field INIT: Initialization Display

This field only displays when the equipment is turned on from mains power and the field is not used

in other navigation. The display is very brief, typically less than 4 seconds, before advancing to the

next field after. The first line of the display illuminates in a r pixel test, and then changing to the

word INITIALIZING, with the model and software release displayed in the second line. The first line

will then change and display an internal option(s) if present.

STEREO ENCODER: YES

Gtx15/2b – rev 1.59

In this example, the transmitter shows the presence (YES) or (NO) of the internal Stereo Encoder

option, before advancing to Operation Field #2.

• Field #00: Escape / Default Display

BE – MARTI Gtx

Gtx15/2b - rev.1.59

This is the default field that shows the equipment model, the software release and the manufacturer's

name. This is the field the display returns back to when an “Escape” is keyed in.

Choosing between the Operation and Setup branch is immediately proposed after the default field is

displayed. At any time, during navigation of the various fields, "escaping" will return back to the

default field. However, after entering a field to change a parameter, then an escape puts you back to

the last navigated field.

• Field #01: Operation / Setup Selection

As the title states, this field allows the Operation or Setup menu branches to be selected by pressing

the one that is highlighted. . Turn the knob to highlight and select which menu branch is desired to

enter. It is not possible to pass from the Operation branch directly to the Setup without passing

through this field

SETUP

OPERATION

• Field #20: Enter Password

ENTER PASSWORD

xxxx

This field will not be displayed if both Level 1 and Level 2 passwords are not enabled.

When passwords are enabled, the field will display when or where required and will display the

Level needed for password recognition to allow further navigation or data entry. If the password is

incorrect or the input is terminated by an "escape", the password states as invalid.