Quick Start Manual

35
LOCAL
8
E
SCROLLING SELECTION
5.3 Main parameter setup
To set the parameters from the display the equipment must be in
LOCAL mode.
It is also possible to partially view the menus in REMOTE mode, provided that the para-
meter “SHOW D. : ALWAYS” is present (for details, refer to the paragraph “User interfa-
ce” on the “System config.” screen).
To switch from LOCAL to REMOTE mode rotate the supplied key on the selector.
In LOCAL mode, the blue led turns on and the screen “TX control panel” is automatically
displayed.
All navigation steps are carried out from the encoder located on the front panel. With
the handle it is possible to perform the following actions:
• HIGHLIGHTED ITEM SELECTION: press the handle briefly.
• ITEM SCROLLING: rotate the handle clockwise/anticlockwise.
• INCREASING/DECREASING: rotate the handle clockwise/anticlockwise.
• GO BACK TO THE MAIN MENU: keep the handle pressed for at least 1 sec.).
Quick instructions for commissioning