Quick Start Manual

27
1
2
3
5 Quick instructions for commissioning
Quick instructions for commissioning
5.1 Installation
If you have a rack, insert and attach the
equipment into it (use the fixing holes on
the side fins).
If you don’t have a rack, please make sure that:
• the equipment is located away from the room walls so that the installation and
maintenance operations can be conveniently carried out;
• the ventilation grids are not clogged;
• the equipment is far from heat sources or flammable products;
• the equipment is isolated from contact with liquids.
Elenos recommends the use of dehumidifiers at the transmitter site to reduce moistu-
re buildup in humid climates when the transmitter is turned off for extended periods.
Make sure the equipment is properly earthed.
This must be carried out at the eyelet located behind
the flange of the output coaxial connector, indicated
by the appropriate symbol.
Check that the mains voltage is appropriate, hence apply the phase conductors and
neutral conductors to the power supply terminal board.
We report here the values of most common connections, other configurations are
independently managed by other countries.
Upon request, Elenos can supply material kits for making them.