User's Manual

4
©2013 Broadcast Electronics
Transmitter Control Center 3
Initial system setup after installation requires interfacing with the LCD display and buttons on the
front of the main assembly. Once initial setup is complete, almost all configurations accessible on this
control center can be modified remotely via Ethernet interfaces.
Figure 2 – Transmitter Control Center
3.1 Contrast Control
A potentiometer tuning tool can be used to adjust the contrast on the LCD screen if desired.
Turning the potentiometer clockwise reduces contrast, and turning it counter-clockwise
increases contrast.
3.2

Left Button
The context dependent left button performs two primary functions. When navigating
between screens it allows a return to the main screen from any other navigation screen.
When an editing screen is entered this button moves the cursor one space to the left.
3.3

Right Button
The context dependent right button performs two primary functions. When navigating
between screens it allows a return to the first screen of the submenu tree. When an editing
screen is entered this button moves the cursor one space to the right.
3.4

Up Button
The context dependent up button performs various functions. When navigating between
screens through the trunk it selects a new submenu tree. After entering a submenu screen it
either selects different branches or cycles through options. When an editing screen is
entered this button modifies the object located at the cursor.
1
2
3
4
5
6