User's Manual

36
©2013 Broadcast Electronics
Maintenance 5
These sections detail steps to maintain or replace STXe60 system modules.
5.1 Clean the Air Filter
STXe60 systems come standard with snapped washable air filters. Air filter cleaning should
be a part of regular system maintenance. To remove the filter from the front of the exciter,
use the opening on the bottom to pry the snaps by hand.
Figure 15 – Air Filter Removal
Remove the filter material from the case for thorough cleaning. Use compressed air or water
to remove debris.
Figure 16 – Separated Air Filter
Snap the air filter back on once clean. Carefully pinch to tighten the snaps if the case is loose
enough to rattle.