User's Manual

32
©2013 Broadcast Electronics
4.10 Primary Program Services
The STXe 60 provides built-in injection of one primary audio source – AES, Composite, or
Analog L/R.
4.10.1
AES
1. Connect an XLR cable from the desired AES audio source.
2. Navigate to the audio input screen.
< AUDIO INPUT >
TRANSMITTER CONTROL CENTER
COMPOSITE
3. Select AES as the primary audio source and return.
AUD IN->AES
TRANSMITTER CONTROL CENTER
^
4. Set the stereo injection reduction (to allocate injection budget for secondary
services). Leave this at 100% if there are no secondary services. Return when
finished adjusting.
100.0% AES
TRANSMITTER CONTROL CENTER
^
Note that -2 dBFS is the 100% peak modulation reference level for the AES stereo signal.
4.10.2
Analog L/R
1. Connect XLR cables from the desired Analog Left and Right audio source. Activate
the source with reference tones for level calibration.
2. Navigate to the audio input menu.
< AUDIO INPUT >
TRANSMITTER CONTROL CENTER
COMPOSITE
3. Select analog L/R as the primary audio source.
AUD IN->ANLG L/R
TRANSMITTER CONTROL CENTER
^