User's Manual

31
©2013 Broadcast Electronics
4.9 Set Time and Date
The internal real time clock holds the current time and date for use in the event log. This is a
rudimentary device that supports 24-hour format and does not adjust for daylight saving. If
installing during summer in a daylight saving region, following standard non-daylight time is
recommended instead.
1. Use the transmitter control center on the front panel of the main assembly to navigate
to the Date and Time menu.
< 2000-01-01 >
TRANSMITTER CONTROL CENTER
00:00:00
2. Navigate to the time editing screen and set the local (24 hour non-daylight saving) time.
SET CLOCK
TRANSMITTER CONTROL CENTER
TIME
TIME-> 00:00:00
TRANSMITTER CONTROL CENTER
^
3. Navigate to the date editing screen and set the current date.
SET CLOCK
TRANSMITTER CONTROL CENTER
DATE
DATE->2000-01-01
TRANSMITTER CONTROL CENTER
^