User's Manual

16
©2013 Broadcast Electronics
Preparing to Install 2
STXe systems come with installation kits tailored to standard BE transmitter installations. Standard C
and T series transmitters require an adapter board and some alternate cabling. Ensure that the
appropriate kit is received, checked, and installed.
2.1 Verify Contents of Shipment
BEI Part # Quantity Description
909-4060-C 1 60W STXe
STXe Manuals
597-4061 1 STXe60 Installation and Maintenance Guide
597-4062 1 STXe60 Operation Manual
979-4160[-100] 1 Both STXe60 Standard Installation Kits
417-0284 2 37PIN D-SUB SHELL
417-3288 1 BNC-JACK TO N-PLUG ADAPTER
418-0283 1 37PIN D-SUB SOLDERPOT
420-0007 4 PHILLIPS SCREW 12-24X3/4"
420-0710 4 PHILLIPS SCREW 10-32X5/8"
421-0002 4 EIA RACK SCREW CLIPS 12-24
423-1018 4 FIBER WASHER .500X.218X.030
682-0001 1 AC LINE CORD, AMERICAN
682-0003 1 AC LINE CORD, EUROPEAN
949-0543 1 BNC COAX JUMPER
949-4130 1 EXCITER ACTIVATION STUB
979-4160 1 STXe60 Standard Installation Kit Only
949-4144 1 STXe TO FM10S CABLE
979-4160-100 1 STXe60 C or T Series Installation Kit Only
422-0106 4 PHILLIPS SCREW10-32X3/8"
441-0101 2 ALUMINUM STANDOFF 10-32X7/8” 5/16HEX
849-3701 1 DB37 MALE - DB37 FEMALE CABLE
919-4001 1 STX I/O INVERTER BOARD
949-4150 1 STXe TO C OR T SERIES CABLE