User's Manual

14
©2013 Broadcast Electronics
Capability
Maximum Overshoot
300 kHz
150%
RF Harmonics Suppression
FCC; DOC; CCIR
Meets all requirements/recommendations
Composite Input
Connector
Impedance
Level
Amplitude Response
Phase Response
THD + Noise
IMD
SNR
BNC
10k ohms, un-balanced
3.5V p-p for 100% modulation
+/-0.03 dB 20 Hz to 53 kHz; +/-0.1 dB 53 kHz to 100 kHz
+/-0.1 degree 53kHz to 100kHz
0.005%
0.005%
-90dBr below 100% modulation @ 400 Hz
SCA1 & 2 Inputs
Connectors(2)
Impedance
Level
Response
BNC
10k ohms, un-balanced
3.5V p-p for 10% modulation
+/-0.1 dB; 53 kHz to 100 kHz
RDS Input
Connector
Impedance
Level
Response
BNC
10k ohms, un-balanced
3.5V p-p for 10% modulation
+/-0.1 dB; 53 kHz to 100 kHz
AES Input
Connector
Impedance
Bits
Rate
Level
XLR Female
110 Ohms, balanced
16-24 bits
32, 44.1, 48, or 96 kHz
-2 dBFS for 100% modulation
Analog L/R Input
Connectors
Impedance
Level
XLR Female
600 Ohms or 10K Ohms selectable, balanced
10dBm into 600 Ohms for 100% modulation
Stereo Generation (AES and Analog L/R Inputs)
Modes
Pre-emphasis
Amplitude Response
THD + Noise
SNR
Stereo Separation
Stereo, Mono L+R, Mono L, Mono R
None, 50 usec, 75 usec selectable
+/-0.25dB; 20 Hz to 15 kHz
0.03% or better at 100% modulation @ 400 Hz
Mono (L+R) 90 dB, Stereo 80 dB or better below 100%
modulation @ 400 Hz
70 dB; 20 Hz to 15kHz
Pilot Output
Connector
Level
BNC, un-balanced
1V p-p +/- 5% into high impedance