Installation Manual

behringer.com

page 1 of 2

musictribe.com

All information in this document is subject to change without any further notice.

X-TOUCH Firmware

Version 1.21 - (14 December 2020)

The X-TOUCH Universal Control Surface Firmware Update V 1.21 provides a x for USB compatibility

issues with AMD Ryzen 4xxx and 5xxx processor series under Windows 10.

BEHRINGER is constantly adding new features and making enhancements to this extremely stable

operating system, so that you always experience the best possible performance from your X-TOUCH

controller. Check out behringer.com for updates regularly.

Note: Please note that rmware 1.12 or higher for X AIR / M-AIR mixers, and rmware 3.01 or higher for

X32/M32 mixers is required for enabling remote control from X-TOUCH via MIDI or Ethernet/LAN.

This new X-TOUCH Firmware version contains:

Bug Fixes

• Fix for USB compatibility issues with AMD Ryzen 4xxx and 5xxx processor series under WIN 10

PAGE 1
X-TOUCH Firmware Version 1.21 - (14 December 2020) The X-TOUCH Universal Control Surface Firmware Update V 1.21 provides a fix for USB compatibility issues with AMD Ryzen 4xxx and 5xxx processor series under Windows 10. BEHRINGER is constantly adding new features and making enhancements to this extremely stable operating system, so that you always experience the best possible performance from your X-TOUCH controller. Check out behringer.com for updates regularly. Note: Please note that firmware 1.
PAGE 2
Update Process: 1. Download the latest SysEx-update from the X-TOUCH product page 2. Keep DISPLAY button pressed during power-on 3. Connect X-TOUCH to computer via USB 4. Use any MIDI SysEx dumper to send the update file (.syx) [Note: Don’t send faster than standard MIDI rate] – SendSX or MIDI-OX on Windows recommended – Snoize SysEx Librarian on OSX recommended 5.