Quick Start Guide

12 X-UF Interface Operation Guide
3. Conguring the PC to Interface
with the X-UF Option Card
Please watch behringer.com for further advice on the software
conguration of X-UF interface card.
Windows: There is an ASIO high-performance
driver available for download,
which is essential for low-latency audio
on Windows-based applications.
Mac OS: The X-UF is CoreAudio compatible and thus
works with low-latency on Mac computers
without any additional driverinstallation.
ASIO Driver for Windows-based Applications
Download the X32 ASIO driver installer les from behringer.com.
There is one zip archive for USB and one for the driver installation
for FireWire serial bus. Unpack the one you intend to use, or both,
on your local hard drive. Double-click on Setup.exe in the
corresponding unpacked folder and follow the instructions on
the screen.
Driver Control Panels
Once the driver is installed, you can open the control panel by
double-clicking on the small tray icon. These screens will allow
conguring the X-UF expansion card in the X32 as an audio
interface for your computer.
Download the X32 full manual from behringer.com and
read the ’X-UF Operation Guide’ chapter for more details.
4. Specications
* depends on system performance and application
Recommended Minimum Hardware:
Windows-based - Core 2 Duo CPU, 2 GHz
application - USB 2.0 or IEEE1394 FireWire 400 port
- 1 GB RAM
Mac - 1.5 GHz CPU
- USB 2.0 or IEEE1394 FireWire 400 port
- 512 MB RAM
Recommended Operating Systems:
Windows: Windows XP 32-Bit SP2 or higher, Windows 7 32-bit, Windows 7 64-bit
(X-UFASIO drivers supplied)
Mac OS X : 10.5 Leopard, 10.6 Snow Leopard, 10.7 Lion
(CoreAudio compatible)
Expansion Card Features:
Interface MIDI
Audio input channels
24-Bit, 44.1/48 kHz
Audio output channels
24-Bit, 44.1/48 kHz
IEEE1394/FireWire 1 in x 1 out 32, 16 or 8 32, 16 or 8
High Speed USB 2.0 1 in x 1 out 32, 16 or 8 32, 16 or 8
DAW remote control Generic MIDI, HUI or Mackie Control emulation (via USB or FireWire)
Expansion Card Performance Modes (Channels):
Interface Minimum round-trip latency
IEEE1394/FireWire <7 ms*
High Speed USB 2.0 <12 ms*