Quick Start Guide
50 51Quick Start GuideU-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Getting star ted
(EN) Step 3: Getting started
Windows operating system:
Please visit www.behringer.com and
downloadthe latest USB driver for
your U-Phoria interface. Unzip the le,
double-click the setup.exe and follow the on-screen
instructions.
Mac OS X operating system: No drivers needed, your
U-Phoria interface operates class-compliant.
Connect to the mains
via the provided power
adapter(UMC404HD).
Connect to a computer via the
provided USB cable. Designate your
U-Phoria device as your audio
(UM2 / UMC22 / UMC202HD) or audio/
MIDI (UMC204HD & UMC404HD) interface in your
DAWsoftware.
Connect a pair of studio headphones to
the connector to monitor input
levels and playback from your audio
software. Use the OUTPUT knob (UM2
& UMC22) or PHONES knob (UMC202HD /
UMC204HD / UMC404HD) to adjust the headphone
volume. Engage the DIRECT MONITOR button (UM2 /
UMC22 / UMC202HD) or adjust the MIX knob
(UMC204HD & UMC404HD) to achieve zero latency
monitoring of your inputsignals.
Connect instruments and audio
sources to MIC/LINE 1 and INST 2 (UM2
& UMC22), INPUT 1 and INPUT 2
(UMC202HD & UMC204HD), or INPUT 1
– 4 (UMC404HD). Use the MIC/LINE GAIN 1 and INST
GAIN 2 (UM2), GAIN 1 and GAIN 2 knobs (UMC22/
UMC202 / UMC204HD), or GAIN 1 – 4 (UMC404HD)
knobs to adjust the input level of the connected
audio sources. Engage the +48 V phantom power
switch on the rear panel if you are recording with
condenser microphones.
Connect a MIDI keyboard, controller, or
other MIDI device via the MIDI ports on
the rear panel
(UMC204HD & UMC404HD).
Connect a pair of studio monitors
to the 1(L) & 2(R) OUTPUTS
(UM2/UMC22 / UMC202HD) or
L & R MAIN OUTS (UMC204HD &
UMC404HD) for playback and mixing. Use the
OUTPUT (UM2 / UMC22 / UMC202HD) or MAIN OUT
(UMC204HD & UMC404HD) knob to adjust the
volume level at the OUTPUTS or MAIN OUT.
(ES) Paso 3: Puesta en marcha
Sistemas Windows: Visite la web
www.behringer.com y descárguese la
última versión del driver USB para su
interface U-Phoria. Descomprima el
chero, haga doble clic en el archivo setup.exe y
siga las instrucciones queaparecerán.
Sistemas Mac OS X: No es necesario ningún driver,
por lo que su interface U-Phoria funcionará de
forma directa.
Conecte la unidad a la corriente
pormedio del adaptador
incluido(UMC404HD).
Conecte esta unidad a un ordenador
por medio del cable USB incluido.
Designe su dispositivo U-Phoria como
su interface audio (UM2 / UMC22 /
UMC202HD) o audio/MIDI (UMC204HD &
UMC404HD) en su programa DAW.
Conecte unos auriculares de estudio a
la toma para monitorizar los niveles
de entrada y la reproducción de su
software audio. Use el mando OUTPUT
(UM2 & UMC22) o el mando PHONES (UMC202HD /
UMC204HD / UMC404HD) para ajustar el volumen
de los mismos. Active el botón DIRECT MONITOR
(UM2 / UMC22 / UMC202HD) o ajuste el mando MIX
(UMC204HD & UMC404HD) para conseguir una
monitorización con latencia cero de sus señales de
entrada.
Conecte instrumentos y fuentes audio
a las tomas MIC/LINE 1 y INST 2 (UM2 &
UMC22), INPUT 1 y INPUT 2 (UMC202HD
& UMC204HD) o INPUT 1 – 4
(UMC404HD). Use los mandos MIC/LINE GAIN 1 y
INST GAIN 2 (UM2), GAIN 1 y GAIN 2 (UMC22 /
UMC202HD / UMC204HD), o GAIN 1 – 4 (UMC404HD)
para ajustar el nivel de entada de las fuentes audio
conectadas. Active el interruptor de alimentación
fantasma de +48 V del panel trasero si va a grabar
con micrófonos decondensador.
Conecte un teclado, controlador u
otrodispositivo MIDI a través de
lospuertos MIDI del panel trasero
(UMC204HD & UMC404HD).
Conecte un par de monitores de
estudio a las salidas 1(L) & 2(R)
OUTPUTS (UM2 / UMC22 / UMC202HD)
o L & R MAIN OUTS (UMC204HD &
UMC404HD) para la reproducción y mezcla del
sonido. Use el mando OUTPUT (UM2 / UMC22 /
UMC202HD) o MAIN OUT (UMC204HD & UMC404HD)
para ajustar el nivel de volumen en las salidas
OUTPUTS o MAIN OUT.