Owner's Manual

ULTRALINK UL2000B

5.3 Audio connections

The audio connections on the ULR2000 are laid out electronically balanced. Of course, you can

connect unbalanced equipment to the balanced connectors.

Fig. 5.2: XLR connections

Fig. 5.3: 1/4" TS connector

Fig. 5.4: 1/4" TRS connector

The transmitter cannot be connected with a cable directly to a mixer, as is the case with wired

microphones. The connection between transmitter and the ULR2000 receiver is wireless. Then, the

receiver passes on the signal over a cable connection.

5. INSTALLATION

DATA-MANFULL_UL2000B_ENG_Rev_A.pmd 04.09.2006, 09:3621