- BEHRINGER Spezielle Operating Manual Network Device UCA202
Table Of Contents
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 1.1 Before you started
- 1.1.1 Shipment
- 1.1.2 Initial operation
- 1.1.3 Online registration
- 2. System REQUIREMENTS
- 2.1 Hardware connection
- 3. OPERATING ELEMENTS AND CONNECTIONS
- 3.1 Front panel
- 3.2 Rear panel
- 4. Working with the UCA202
- 4.1 Application example
- 5. Audio CONNECTIONS
- 5.1 Wiring
- 5.2 Headphones connection
- 6. SPECIFICATIONS
- 7. Warranty
4
U-CONTROL UCA202
UCA202UCA202
UCA202UCA202
UCA202
V Ultra-flexible audio interface connects your instruments, mixer etc. with your computer for recor-
ding and playback
V High-resolution 48 kHz converters for high-end audio quality
V Works with your PC or Mac–no setup or drivers required. Free audio recording and editing softwa-
re downloadable at www.behringer.com
V Stereo headphone output with dedicated level control lets you monitor both input and output
V Additional S/PDIF optical output for direct digital conversion
V Powered via USB bus–no external power supply needed
V High-quality components and exceptionally rugged construction ensure long life
V Conceived and designed by BEHRINGER Germany
All Trademarks mentioned belong to their respective owners and are not affiliated with BEHRINGER
®
Ultra low-latency 2 In/2 Out USB/Audio Interface with Digital Output
U-CONTROL