- BEHRINGER Spezielle Operating Manual Network Device UCA202
Table Of Contents
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 1.1 Before you started
- 1.1.1 Shipment
- 1.1.2 Initial operation
- 1.1.3 Online registration
- 2. System REQUIREMENTS
- 2.1 Hardware connection
- 3. OPERATING ELEMENTS AND CONNECTIONS
- 3.1 Front panel
- 3.2 Rear panel
- 4. Working with the UCA202
- 4.1 Application example
- 5. Audio CONNECTIONS
- 5.1 Wiring
- 5.2 Headphones connection
- 6. SPECIFICATIONS
- 7. Warranty
12
U-CONTROL UCA202
3. OPERATING ELEMENTS AND CONNECTIONS
3. OPERATING ELEMENTS AND CONNECTIONS
3.1 Front panel
1
2 3 4
LED
Fig. 3.1: Front panel UCA202
The LED indicates the status of the USB power supply.
DIGITAL OUTPUT: The Toslink jack carries an S/PDIF signal which can be connected via a fiber
optic cable, for example, to the digital input of an effects device.
Use the jack to connect a standard pair of headphones equipped with a 1/8" TRS connector.