User Manual U-CONTROL UCA202 Ultra-Low Latency 2 In/2 Out USB/WAudio Interface with Digital Output V 6.
U-CONTROL UCA202 User Manual Table of Contents Thank you Thank you.......................................................2 Thank you for choosing the new UFO202 U-PHONO interface from Behringer. You will now be able to transfer all your great albums from the vinyl and tape eras into the digital realm with the help of this easy-to-use device. It features stereo RCA inputs and outputs to allow both monitoring and recording of the audio source.
U-CONTROL UCA202 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
y wherever it s you to the insulated he enclosure ient to wherever it s you to rating and n the ease read isk of do not rear parts inside. ersonnel. isk of shock, do o rain and all not plashing with be placed nstructions qualified educe not r than that produce heat. according to the WEEE Directive 9. Do not defeat the safety purpose (2012/19/EU) and your national law. 4 of the U-CONTROL UCA202 User Manual polarized or grounding-type This product should be taken to a plug.
U-CONTROL UCA202 User Manual 1. Introduction 1.1 Before you started Welcome to the family of U-CONTROL users and thank you for expressing your confidence in Behringer products by purchasing the UCA202. With the UCA202 you have purchased a high-performance audio interface that includes a USB connector. It is thus an ideal sound card for your laptop computer or an essential recording/playback component for studio environments that involve desktop computers. 1.1.
U-CONTROL UCA202 User Manual The current supply is made via the USB connecting cable, so that there is no external power supply unit required. All required safety precautions have been adhered to. 1.1.3 Online registration Please register your new Behringer equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully. Should your Behringer product malfunction, it is our intention to have it repaired as quickly as possible.
U-CONTROL UCA202 User Manual 3. Operating Elements and Connections 3.1 Front panel 3.2 Rear panel (1) LED (2) (3) (4) (5) (6) (7) Fig. 3.1: Front panel UCA202 Fig. 3.2: Back of the UCA202 (1) The LED indicates the status of the USB power supply. (5) Use the jack to connect a standard pair of headphones equipped with a 1/8" TRS connector.
U-CONTROL UCA202 User Manual 4. Working with the UCA202 4.1 Application example TRUTH B2031A XENYX1204FX U-CONTROL UCA202 Laptop Fig. 4.
U-CONTROL UCA202 User Manual To provide a professional recording interface between mixing console and computer, you can use the UCA202 in combination with a suitable mixing console that includes subgroup outputs. This type of setup allows you to record several signals in the computer at the same time, to simultaneously play back several takes or playbacks which have been recorded, and to listen to the whole recording via loudspeakers (or headphones). Figure 4.1 shows a possible setup with one UCA202.
U-CONTROL UCA202 User Manual 6. Specifications 5.1 Wiring Please use standard RCA cables to connect the UCA202 to other audio equipment. You can also use an adapter cable. tip tip sleeve shield Line In Connectors Input impedance Max. input level RCA, unbalanced approx. 27 kΩ 2 dBV sleeve Line Out Connectors Output impedance Max. output level Fig. 5.1: RCA cable sleeve tip sleeve tip Fig. 5.2: Adapter cable with ¼" jack 5.
U-CONTROL UCA202 User Manual Power Supply USB 1.1 Connectors type A Digital Processing Converter Sample rate THD Crosstalk Signal-to-noise ratio 5V , 100 mA max. Dimensions/Weight 16-bit converter 32.0 kHz, 44.1 kHz, 48.0 kHz System Data Frequency response USB connection 10 Hz to 20 kHz, ±1 dB @ 44.1 kHz sample rate 10 Hz to 22 kHz, ±1 dB @ 48.0 kHz sample rate 0.05% typ. @ -10 dBV, 1kHz -77 dB @ 0 dBV, 1 kHz A/D 89 dB typ. @ 1 kHz, A-weighted D/A 96 dB typ.
U-CONTROL UCA202 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from U-CONTROL UCA202 that to which the receiver is connected.
We Hear You
