Quick Start Guide

4 SYSTEM 55
クイックスタートガ イド
5
Modules
Your System 55 has three rows of modules
Top Row
(1) 914 Fixed Filter Bank (FFB).
(2) 923 Filters and Noise Sources.
(3) 904B High Pass Filter (HPF).
(4) 904A Low Pass Filter (LPF).
(5) 992 Control Voltages.
(6) & (7) /
(10)
-
(12)
902 Voltage Controlled Ampliers (VCA).
(8) & (9) /
(14)
&
(15)
911 Envelope Generators (EG).
(13)
911A Dual Trigger Delay (DTD).
Middle Row
(1) & (5) 921A Oscillator Driver.
(2) - (4) / (6) - (8) 921B Voltage Controlled Oscillators (VCO).
(9) 921 VCO/LFO.
(10) 960 Sequential Controller.
(11) CM1A – MIDI interface.
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
Bottom Row
(1) / (4) / (7) CP3A – O.
(2) / (5) / (8) CP3A – M.
(3) & (6) 995 Attenuators.
(9) 903A Random Signal Generator.
(10) CP35 Attenuator / Voltage Source / Multiple.
(11) 961 Interface.
(12) 962 Sequential Switch.
Further information on all modules can be found on their individual Quick Start Guides at www.behringer.com/downloads.html
電力要件
 

13 VDC, 5A

 65 W
System 55 - はじめに
ハードウェアセットアップ
   System 55 
        
System 55 
     
ウォームアップ時間
System 55 30 

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)