Version 1.0 September 2000 EURORACK ® www.behringer.
EURORACK MXB1002 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electrical shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to constitute a risk of shock.
EURORACK MXB1002 EURORACK ® Professional 10-channel mixing console with optional battery operation and monitor plus effects paths MXB1002 s 10-channel mixing console with two mono channels, three stereo channels and a separate stereo tape channel s Optional mains or battery operation (with alkaline batteries) s Separate gain controls for mic and line inputs on all stereo channels s Gold-plated XLR mic connectors on all mono and stereo channels s Ultra low-noise, discrete mic preamplifiers on all microp
EURORACK MXB1002 1. INTRODUCTION Congratulations! With the MXB1002 you have purchased a state-of-the-art 10-channel mixing console that sets new standards. Our prime goal when developing the MXB1002 was to design a console that can be used for a great variety of applications. And to give you maximum flexibility, you can operate the MXB1002 both from the mains and from batteries.
EURORACK MXB1002 10 + Connect the FX SEND connector to the input of an external effects device. The MXB1002 has no dedicated FX Return connectors. However, you can connect the outputs of an external effects device to the 1/4" jack inputs of the stereo channels or channels 9/10. In this case, the stereo channels FX control must be set to -oo to avoid any feedback problems. 1.3.2 Front panel The mono channels 1 and 2 of your MXB1002 feature the same control elements.
EURORACK MXB1002 2. WIRING Fig. 2.1: Various connector types Fig. 2.2: Wiring diagram of insert cable and headphones plug 6 2.
EURORACK MXB1002 3. SPECIFICATIONS INPUT CHANNELS 1 & 2 Mic input Frequency response Gain range SNR Line input Frequency response Gain range SNR electronically balanced, discrete input configuration 10 Hz to 200 kHz +14 dB to +60 dB 120 dB E.I.N. electronically balanced 10 Hz to 130 kHz -6 dB to +38 dB 95 dB E.I.N. STEREO CHANNELS 3/4 - 7/8 & 9/10 Frequency response 10 Hz to 70 kHz Gain range Line: -oo to +15 dB / Mic: +13 to +60 dB SNR Line: 96 dB / Mic: 104 dB E.I.N.
EURORACK MXB1002 4. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
