Specifications

21
20
Our light-as-a feather iNUKE power amps have
been wildly successful, and we’ve sold truckloads
of them all over the world! Why? Because they
are ultra-dependable, put out massive amounts
of power, yet weigh so very little thanks to our
revolutionary high-density Class-D technology
and ultra-e cient switch-mode power supplies.
But we think we may have outdone ourselves
with the new iNUKE NU12000, which packs a
whopping 12,000- Watt total output! Yes, that’s
right—a stereo power ampli er with 6,000 Watts
output per channel @ 2Ohms, or 2 x 3,000 Watts
@ 4Ohms—and it weighs less than 18 lbs. / 8.2kg.
Thisgroundbreaking ampli er is also available
in a USB-addressable DSP version, the iNUKE
NU12000DSP.
Superb Transient Response
We spent years  ne-tuning the high- density
Class-D technology that gives the iNUKE Series its
oomph. By carefully selecting semiconductors with
extremely high slew rates and optimizing other
proprietary parts of our circuitry, these amps react
instantly to even the most demanding electronic
bass impulses. When this amazing ampli er
technology is combined with our state-of-the-art
switch-mode power supplies, these ampli ers
provide tremendous punch. Andbecause they are
so much more e cient than conventional designs,
theyrun cooler and don’t require huge, massive
heat sinks and heavy toroidtransformers.
Sublimely Simple Operation
The front panel controls and indicators provide
your system’s vital signs at a glance. After pressing
the Power button, the Power LED lights to show
the amp is ready for action. All channels feature
positive-detent Gain controls with Signal LEDs that
light when a signal is present, as well as clip LEDs to
indicate when the signal is distorted and you need
to reduce the input signal.
iNUKE DSP
For sound engineers requiring high- level control
capability, iNUKE DSP Series ampli ers come ready
for action right out- of-the-box. The built-in DSP
and 24-bit/96kHz converters ensure the ultimate
signal integrity with an extremely broad dynamic
range. DSP functions include a sophisticated
delay, crossover, EQ(8 parametric, 2dynamic),
and dynamics processing with lockable security
settings. A convenient front panel LCD display
allows you to setup and make adjustments directly
at the ampli er, without the need for a PC. But all
iNUKE DSP models can also be set up, controlled
and monitored via the front panel USB connector.
Value
Sporting massive output ratings, cool-running
and lightweight Class-D technology, and all the
amenities a professional audio engineer could ask
for, BEHRINGER iNUKE ampli ers are serious amps
for the most demandingapplications.
• Ultra-e cient switch-mode power supply for
noise-free audio, superiortransient response
and low power consumption
• “Zero-Attack” limiters o er maximum output
level with reliable overloadprotection
• Built-in Subwoofer/Satellite crossover for
more exibility
• Precise Power, Signal and Limit LEDs to
monitorperformance
• XLR and ¼” TRS combination input connectors
for compatibility with anysource
• Professional twist lock speakerconnectors
• Independent DC and thermal overload
protection on each channel automatically
protects ampli er and speakers without
shutting down theshow
iNUKE NU12000
*
— Ultra-Lightweight,
High-Density 12,000-Watt Power Ampli er
• Delivers 2 x 6,000 Watts into 2 Ohms,
2x3,000 Watts into 4 Ohms and weighs less
than 18 lbs / 8.2 kg
iNUKE NU4-6000 — Ultra-Lightweight,
High- Density 6,000-Watt 4-Channel
PowerAmpli er
• Delivers 4 x 1,500 Watts into 4 Ohms,
4x750Watts into 8 Ohms and weighs less than
12 lbs / 5.5 kg
iNUKE NU6000 — Ultra-Lightweight
High-Density 6000-Watt Power Ampli er
• Delivers 2 x 3,000 Watts into 4 Ohms,
2x1,500 Watts into 8 Ohms and weighs less
than 12 lbs / 5.5 kg
NEW! iNUKE NU12000 & NU12000DSP Power Amps
Ultra-Lightweight High-Density 12,000-Watt Power Amplifi ers with DSP Control and USB Interface
Imagine 12,000 Watts
Under 18 Lbs.
Join the iNUKE Revolution
iNUKE NU3000 — Ultra-Lightweight
High- Density 3,000-Watt Power Ampli er
• Delivers 2 x 1,500 Watts into 2 Ohms;
2x880 Watts into 4 Ohms; 3,000 Watts into
4 Ohms (bridge mode) and weighs less than
7 lbs / 3.3 kg
iNUKE NU1000 — Ultra-Lightweight
High- Density 1,000-Watt Power Ampli er
• Delivers 2 x 500 Watts into 2 Ohms;
2x300Watts into 4 Ohms; 1,000 Watts into
4 Ohms (bridge mode) and weighs less than
7 lbs / 3.3 kg
iNUKE NU12000DSP/NU6000DSP/
NU3000DSP/NU1000DSP
Common Features:
• Ultimate reliability through revolutionary
cool- running High-Density Class-D technology
with “near-zero” thermalbuildup
• Ultra-e cient switch-mode power supply for
noise-free audio, superiortransient response
and low power consumption
• High-performance DSP and 24- bit/96kHz
converters deliver ultimate signal integrity and
extreme dynamicrange
• DSP section features sophisticated delay,
crossover, EQ (8 parametric, 2 dynamic),
dynamics processing and lockable
securitysettings
• Front panel LCD display enables setup and
adjustment without PC
• Can be set up, controlled and monitored via
front panel USB connector
• “Zero-Attack” limiters o er maximum output
level with reliable overloadprotection
• Built-in Subwoofer/Satellite crossover for
perfect subwoofer operation
• Precise 4-segment Signal and Limit LEDs to
monitor performance
• XLR and ¼" TRS combination input connectors
for compatibility with anysource
• Professional twist-lock speaker connectors for
ultimate reliability
• Independent DC, LF and thermal overload
protection on each channel automatically
protects ampli er and speakers without
shutting down theshow
iNUKE NU12000DSP
*
— Ultra-Lightweight,
High-Density 12,000-Watt Power Ampli er with
DSP Control and USB Interface
• Delivers 2 x 6,000 Watts into 2 Ohms,
2x3,000 Watts into 4 Ohms and weighs less
than 18 lbs / 8.2 kg
iNUKE NU6000DSP — Ultra-Lightweight,
High- Density 6,000-Watt Power Ampli er with
DSP Control and USB Interface
• Delivers 2 x 3,000 Watts into 4 Ohms,
2x1,500 Watts into 8 Ohms and weighs less
than 12 lbs / 5.5 kg
iNUKE NU3000DSP — Ultra-Lightweight,
High- Density 3,000-Watt Power Ampli er with
DSP Control and USB Interface
• Delivers 2 x 1,500 Watts into 2 Ohms;
2x880 Watts into 4 Ohms; 3,000 Watts into
4Ohms (bridge mode) and weighs less than
8 lbs / 3.5kg
iNUKE NU1000DSP — Ultra-Lightweight,
High- Density 1,000-Watt Power Ampli er with
DSP Control and USB Interface
• Delivers 2 x 500 Watts into 2 Ohms;
2x300Watts into 4 Ohms; 1,000 Watts into
4 Ohms (bridge mode) and weighs less than
8 lbs / 3.5 kg
Class-D Ampli er
Technology delivers
high power with
lowweight.
Class-AB
WEIGHT
Class-D
EFFICIENCY
Class-AB
Class-D
NU4-6000
iNUKE NU12000/NU4-6000/NU6000/
NU3000/ NU1000
Common features:
• Ultimate reliability through
revolutionary cool- running
High-Density Class-D
technology with “near-zero”
thermalbuildup
* This device has not been authorized by the rules of the Federal Communications Commission. This device is not, and may not be, o ered for sale or lease, or sold or leased in the 50 U.S. states, the District of Columbia and U.S. possessions, until authorization is obtained.
Download Remote Editor Software at behringer.com