Brochure
Page 8 of 8
behringer.com
©2010 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing.
All trademarks (except BEHRINGER, the BEHRINGER logo, EUROPOWER, EUROLIVE, FBQ, XPQ and XENYX) mentioned belong to their respective owners, and such use neither constitutes a claim of the
trademarks by Behringer nor affi liation of the trademark owners with Behringer. BEHRINGER accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon
any description, photograph or statement contained herein. 985-10000-00448
For service, support or more information contact the BEHRINGER location nearest you:
Europe Tel.: +49 2154 9206 4149, Fax: +49 2154 9206 4199
USA/Canada Tel.: 1 425 672 0816, Fax: +1 425 673 7647
Singapore Tel.: +65 5845 1800, Fax: +65 6214 0275
Australia Tel.: +61 3 9877 7170, Fax: +61 3 9877 7870
Japan Tel.: +81 3 5281 1180, Fax: +81 3 5281 1181
PMP1680S
MICROPHONE INPUTS
Type XLR, electronically
balanced input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm source resistance -112 dB / 114 dB A-weighted
@ 50 Ohm source resistance -112 dB / 114 dB A-weighted
@ 150 Ohm source resistance -112 dB / 114 dB A-weighted
Frequency response < 10 Hz - 200 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +30 dB, +10 dB with pad
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.2 kOhm balanced /
1.1 k Ohm unbalanced
Signal-to-noise ratio 110 dB / 114 dB A-weighted
(0 dBu In @ +10 dB gain)
Noise (THD + N) 0.001% / 0.0007% A-weighted
MONO LINE INPUTS
Type ¼" TS connectors, balanced
Impedance approx. 20 kOhm, balanced
Max. input level +21 dBu
STEREO LINE INPUTS
Type ¼" TRS connectors, unbalanced
Impedance approx. 100 kOhm, unbalanced
Max. input level +21 dBu
EQUALIZER
Low 80 Hz / +/-15 dB
Mid 2.5 kHz / +/-15 dB
High 12 kHz / +/-15 dB
CD/TAPE INPUT
Type RCA
Impedance approx. 10 k Ohm
PREAMP OUTPUTS
MAIN
Type ¼" TS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
MONITOR
Type ¼" TS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
STEREO OUTPUTS
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. input level +21 dBu
Type RCA
Impedance approx. 1 kOhm
Max. input level +21 dBu
LOUDSPEAKER OUTPUTS
Type Twist-lock professional
speaker connector
Load impedance:
MAIN L/R 4 - 8 Ohm
MONITOR/MAIN MONO 4 - 8 Ohm
MAIN MONO/MAIN MONO 4 - 8 Ohm
BRIDGE 8 - 16 Ohm
DSP
Converter 24-bit Delta-Sigma,
64/128-times oversampling
Dynamics D/A 90 dB
Sampling rate 40 kHz
Delay Time max. 5 secs
Signal run time
(Line In > Line Out) approx. 1.5 ms
DISPLAY
Type 2 x 2-digit, 7-segment LED
OUTPUT POWER
RMS @ 1% THD, both channels driven:
8 Ohm per channel 300 W
4 Ohm per channel 600 W
RMS @ 1% THD, bridged mode:
8 Ohm 1200 W
Peak Power, both channels driven:
8 Ohm per channel 400 W
4 Ohm per channel 800 W
Peak Power, bridged mode:
8 Ohm 1600 W
POWER SUPPLY
Mains voltage
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50/60 Hz
Europe/Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Fuse 100 - 120 V~ T 10 A H 250 V
Fuse 220 - 240 V~ T 6.3 A H 250 V
POWER CONSUMPTION
Power consumption 1050 W
Mains connector IEC standard receptacle
DIMENSIONS/WEIGHT
Dimensions (H x W x D) 12 / x 18 / x 8 /"
315 x 460 x 220 mm
Weight 21.8 lbs / 9.9 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result
of these e orts, modi cations may be made from time to time to existing products without
prior notice. Speci cations and appearance may di er from those listed or illustrated.
EUROPOWER
PMP6000
PMP4000
PMP1680S








