Specification Sheet

4
SPECIFICATIONS
Input channels
Mic input electronically balanced, discrete input configuration
Mic E.I.N. (22 Hz - 22 kHz) -129.5 dBu, 150 Ohm source
-117.3 dBqp, 150 Ohm source
-132.0 dBu, input shorted
-122.0 dBqp, input shorted
Distortion (THD&N) 0.007% at +4 dBu, 1 kHz, Bandwidth 80 kHz
Gain range +10 dB to +60 dB
Max input (Mic) +12 dBu
Line input electronically balanced
Sensitivity range +10 dBu to -40 dBu
Max input (line) +22 dBu
Channel fader range +10 dB to -85 dB
Aux Send gain range off to +15 dB
Equalization
Hi shelving 12 kHz +/- 15 dB, Q fixed at 2 oct.
Mid bell 2.5 kHz +/- 15 dB, Q fixed at 2 oct.
Lo shelving 80 Hz +/- 15 dB, Q fixed at 2 oct.
Lo Cut filter -3 dB at 75 Hz, 18 dB/oct.
Main Mix Section
Noise bus noise, fader 0 dB, channels muted:
-100.0 dBr (ref.: +4 dBu), fader 0 dB, all input channels assigned and
set to Unity Gain: -88.5 dBr (ref.: +4 dBu)
Max output +28 dBu balanced XLR,
+22 dBu unbalanced, 1/4" jacks
Aux Returns gain range off to Unity to +20 dB
Aux Sends max out +22 dBu
General
Distortion (THD&N) 0.007 %, at +4 dBu, 1 kHz, bandwidth 80 kHz
below 0.02 %, 22 Hz - 22 kHz normal operating levels,
any input to any output, bandwidth 80 kHz
Frequency Response 10 Hz - 120 kHz +/- 3 dB, any input to any output
Power Supply
External Power Supply USA/Canada 115 V ~, 60 Hz, power supply MXUL2
U.K./Australia 240 V ~, 50 Hz, power supply MXUK2
Europe 230 V ~, 50 Hz, power supply MXEU2
Japan 100 V ~, 60 Hz, power supply MXJP2
Physical
Dimensions (H * W * D) app. 1.34" / 3.31" (34 mm / 84 mm) * 11.42" (290 mm) * 14.49" (368 mm)
Net weight app. 3,9 kg (PSU not included)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.