Other Content

5 MONITOR SPEAKERS MS16 User Manual
(6) Connect your headphones via the PHONES output (/" TRS)
to monitor any of the input devices. When headphones are
connected, the internal loudspeakers are automatically
switched o.
(7) The POWER switch turns the unit on or o. The POWER switch
should always be in the “O” position when you are about to
connect your unit to themains.
◊ Please note that the POWER switch does not disconnect
the device from the mains. If the device is not in use for a
long period of time, please disconnect it from the mains by
unplugging the power cord from the power socket.
(8) The POWER LED lights up when power is switched on.
(9) INPUT 1 (/" TRS) allows you to connect audio equipment such
as CD/MD players.
(10) Use INPUT 2 (RCA) to connect your soundcard, keyboard or
expander.
◊ You can play back various signals by using both stereo
inputs simultaneously.
(11) SPEAKER TO LEFT connector. Connect both speakers by using
the speaker cable included in this package. As soon as both
speakers are properly connected, they will function as a stereo
speaker system.
(12) SPEAKER FROM RIGHT connector. Insert the speaker cable
from the SPEAKER TO LEFT connector.
(13) AC POWER input. Connects your MS16 to the power source.
Before you connect the unit to the power source make sure that
the power switch is turned o and the volume control is turned
to the far left position to avoid any damage to speakers or any
other device.
(14) SERIAL NUMBER. Please take the time to ll in and return the
warranty card within 14 days after the date of purchase, so as
to benet from our extended warranty. Or register online at
(behringer.com).
3. Wiring and Application Example
The MONITOR SPEAKERS MS16 are designed to accommodate a
variety of dierent connector types for almost any situation you
may encounter.
You will nd all audio inputs on the right speaker. The left speaker
only has one audio input which is fed from the right speaker.
First of all, you should connect the left to the right speaker by wiring
the attached speaker cable from the right speakers’ SPEAKER TO LEFT
connector to the SPEAKER FROM RIGHT connector of the left speaker.
Speaker Cable
Right Speaker
Left Speaker
Connect your soundcards’ speaker outputs to the MS16 stereo input.
Of course, you can also connect your keyboard or mixer to this input.
If you own an additional sound source—such as CD or MD player—
simply connect it to the second stereo input. Both input signals are
mixed in the MS16 which enables you to monitor two dierent sound
sources simultaneously.