Specification Sheet

3 TUBE ULTRAGAIN MIC200TUBE ULTRAGAIN MIC200 Technical Specifications
1
Equivalent Input Noise
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed
or illustrated.
MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are
subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2015 All rights reserved.
System Data
Signal-to-noise ratio 90dB A-weighted @ -28dBu inputlevel
Frequency Response
Mic input <10Hz to 47kHz (±3dB)
Line input <10Hz to 55kHz (±3dB)
Function Controls
GAIN variable (+26dB to +60dB)
OUTPUT variable (-∞ to +10dB)
Preamp mode control selection of various preamp settings for microphone andinstruments
Function Switches
20 dB PAD level attenuation (20dB)
+48 V activates the phantom power
LOW CUT High pass lter (cut-ofrequency90Hz)
PHASE REVERSE Phase reverse (180°)
Indicators
Input Level 8-segment LED meter: -24, -18, -12, -6, 0, +6, +12, Clip
Power LED indicates operation
Power Supply
Mains Voltage
USA/Canada 120V~, 60Hz
Europe/U.K./Australia 230V~, 50Hz
China 220V~, 50Hz
Korea 220V~, 60Hz
Japan 100V~, 50 / 60Hz
Mains connector external power supply 9V~ / 1300mA
Physical / Weight
Dimensions (H x W x D) approx. 64x 135x 135mm (2.5 x 5.3 x 5.3")
Weight (without power supply) approx. 1.0kg