User Manual

5 VIRTUALIZER 3D FX2000 User Manual
behringer.com
Introduction1.
In order to generate an extremely natural reverberation, we at BEHRINGER
have developed new kinds of algorithms for virtual acoustics.These algorithms
will help you calculate all room and reverberation parameters with absolutely
professional quality and naturalness.
In spite of this extensive and calculation-intensive work performed by the
24-bit processor in the FX2000, the VIRTUALIZER PRO is very easy to handle.
Changing parameters to achieve a specific sound is simple. There are 100 presets
available to store your own programs.
The FX2000 includes excellent reverb and delay programs, but that’s not all.
Besides the classic plate reverb simulations, the VIRTUALIZER PRO will impress
you with its excellent modulation effects (like chorus, flanger and phaser),
which were extended to include special variations like a musical pitch shifter, a
tremolo, and a rotary speaker simulation. The FX2000’s dynamic and psycho-
acoustic effects allow you to do without a number of additional pieces of
equipment. The FX2000 also offers you a series of distortion and amplification
sounds that are combined with a speaker simulation. Thus, as a guitarist in
recording situations, you can achieve an excellent sound on tape or hard disk,
even without a speaker cabinet. Besides its logical and simple operation,
the VIRTUALIZER PRO’s technical equipment is also impressive. The following
points ensure signal processing at a professional level:
Extremely low-noise and exact 24-bit A/D and D/A converters.•
A professional sample rate of 46 kHz guarantees a high signal resolution for a •
frequency response of 20 Hz to 20 kHz.
The 24-bit processor features dual engine software; these two sections •
process audio input independently.
As for all BEHRINGER products, the highest quality components and controls •
are used.
The following instructions will give you a brief run-down on the ◊
terminology and functions of the VIRTUALIZER PRO. After reading,
please store this manual in a safe place for future reference.
The concept1.1
BEHRINGER uses an uncompromising selection of components. The heart of
the BEHRINGER VIRTUALIZER PRO is a 24-bit DSP, which, due to its exceptional
technical specifications, is regarded as one of the finest building blocks. With it
come the first class 24-bit A/D-D/A converters, guaranteeing a precise conversion
of audio signals. Narrow-range tolerance resistances and capacitors, high-grade
switches, and other selected components are all very high in quality.
The VIRTUALIZER PRO was manufactured on the basis of SMD technology
(Surface Mounted Device). The use of sub-miniature building blocks known from
space flights allows not only an extreme packing density but also ensures an
increased dependability. The FX2000 was manufactured under ISO9000 certified
management system.
Before you get started1.2
The VIRTUALIZER PRO was carefully packed in the factory to ensure safe
transport. Nevertheless, if the box shows signs of damage, please check the
equipment immediately for any signs of external damage.
Damaged units should NEVER be sent directly to us. Please inform the ◊
dealer from whom you acquired the unit immediately as well as the
transportation company from which you took delivery of the unit.
Otherwise, all claims for replacement/repair may be rendered invalid.
To assure optimal protection of your FX2000 during use or transport, ◊
we recommend utilizing a carrying case.
Please always use the original packaging to avoid damage due to ◊
storage or shipping.
Never let unsupervised children play with the FX2000 or with ◊
its packaging.
Please dispose of all packaging materials in an environmentally-◊
friendly fashion.
The BEHRINGER VIRTUALIZER PRO requires one standard 19" rack unit of space
(1 ⁄"). Please leave an additional 4" installation depth to allow connections at
the rear side.
Make sure that there is adequate ventilation and do not place the
VIRTUALIZER PRO on top of an amplifier, which could cause overheating.
Before connecting the VIRTUALIZER PRO to the mains, carefully check ◊
that your equipment is set to the correct voltage:
The fuse holder on the female mains connector has 3 triangular markings,
with two of these triangles opposing each other. The VIRTUALIZER PRO is set to
the operating voltage printed next to these markers and can be set to another
voltage by turning the fuse holder by 180°. CAUTION: This instruction
does not apply to export models exclusively designed, e.g. for
120-V operation!
Connection to the mains is made by a mains cable with an IEC receptacle that
complies with the required safety regulations.
Please make sure that the unit is grounded at all times. For your own ◊
protection, you should never tamper with the grounding of the cable
or the unit itself. The unit shall always be connected to a mains socket
outlet with a protective earthing connection.
Installation and operation of this equipment must be carried out by ◊
competent staff only. Both before and after installation, the staff using
the equipment should make sure that it is properly grounded since
otherwise electrostatic discharge etc. can lead to an impairment of its
operation. For more information, see chapter 6 “Installation”.
The BEHRINGER VIRTUALIZER PRO is equipped with electronically servo-balanced
inputs and outputs. The circuit design features automatic hum suppression for
balanced signals and thus ensures trouble-free operation, even at the highest
operating levels. Externally induced mains hum, etc. can therefore be effectively
suppressed. The automatic servo-function recognizes the presence of unbalanced
connectors and adjusts the nominal level internally to avoid level differences
between the input and output signals (6-dB correction).
The MIDI connectors (IN/OUT/THRU) are standard DIN plug connections. The data
communication is isolated from ground by opto-couplers.