Quick Start Guide

28 29Quick Start GuideFLOOD PANEL FP150
(1) (2) (3) (4)
(5) (7)
(6) (8)
Display Functions
Press the MENU button to access menu options, keep pressing MENU to toggle menu items. Press the ENTER button to access desired
functions and the display will ash, then use the UP/DOWN buttons to navigate and select the desire setting. Press ENTER to save and
conrm, or press MENU to go back without saving.
The main functions are as follows:
Menu Options and Settings Description
Addr A001-512 UP/Down to select address from 1 to 512
ChAn 5Ch/8Ch DMX Channel selection 5/ 8 Channel mode
MASL MASt Activate MASTER (HOST) mode option
SLAv Activate SLAVE mode: when connected to DMX input, slave unit replicates the master
(HOST) unit
CoLo Co- Activate Color mode, select one of the 16 preset colors below
Co01 Preset color 1 Red
Co02 Preset color 2 Green
Co03 Preset color 3 Blue
Co04 Preset color 4 White
Co05 Preset color 5 Lime
Co06 Preset color 6 Royal purple
Co07 Preset color 7 Orange
Co08 Preset color 8 Aqua green
Co09 Preset color 9 Purple
Co10 Preset color 10 Gold
Co11 Preset color 11 Cyan
Item No. Silkscreen Function
Button:
1 MENU
Activates main menu and toggles
between menu items. Closes an
open submenu without saving
2 DOWN
Decreases the displayed value by
one/ Navigate function
3 UP
Increases the displayed value
by one/ Navigate function
4 ENTER
Enter selected function/
Conrm and save
LED:
5 DMX Flashes when in DMX mode
6 MASTER Flashes when in MASTER Mode
7 SLAVE Flashes when in SLAVE Mode
8 SOUND
Flashes when in
Sound Active Mode
Display
Menu Options and Settings Description
Co12 Preset color 12 Lavender
Co13 Preset color 13 Yellow
Co14 Preset color 14 Sky Blue
Co15 Preset color 15 Magenta
Co16 Preset color 16 Warm White
Co17 Preset color 17 Cool White
Stro FS00-99 Select strobe frequency from FS00 = o, FS99=Max strobe speed
Auto SPEd SP01-99 Activate Auto mode.Select SP01 Min speed, SP99 Max speed
Stro FS00-99 Auto mode select strobe frequency from FS00 = o, FS99=Max strobe speed
ProG Pr- Pr01 - 16 Activate SHOW mode. Select PR1-16 to select among 16 preset shows. Pr01-05 color fade,
Pr06-10 color jump, Pr11-16 Fade in/fade out
Sped SP01-99 Show mode select SP01 Min speed, SP99 Max speed
Manu dIM d000-100 Manual mode select dimmer brightness from 0 = o, 100=max
r r000-r255 Manual mode select Red LED brightness from 0 = o, 255=max
G G000-G255 Manual mode select Green LED brightness from 0 = o, 255=max
b b000-b255 Manual mode select Blue LED brightness from 0 = o, 255=max
Stro FS00-99 Manual mode select strobe frequency from FS00 = o, FS99=Max strobe speed
SoUn on Turn SOUND CONTROL ON. The AUTO and Show mode will follow the rhythm of the music
oFF Turn SOUND CONTROL mode OFF
Sens S001-100 Select sound sensitivity of SOUND mode from low to 100 high
bLnD no when DMX signal is interrupted, it will go back to last selected mode
YES when DMX signal is interrupted, it will black out
Led on The led display is always ON
oFF The led display will turn o after 25-30 seconds. Touch any key to turn it back ON
Disp dISP The led display in normal direction
dSIP The led display inverted 180 degree
tESt tESt Press ENTER to start test mode, light will perform routine test
FhrS Press enter to show xture run time
vEr Press enter to show software version