Manual

8 EUROLIVE F1320D User Manual
Audio Connectors4.
Both audio inputs of the BEHRINGER F1320D and the LINK OUTPUT connector are
fully balanced. To maximize interference compensation, try to establish balanced
connections to other equipment, whenever possible.
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)
Fig. 4.1: ¼" TRS connector
output
For unbalanced use, pin 1 and pin 3 have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
12
3
1
2
3
Balanced use with XLR connectors
Fig. 4.2: XLR connectors
Make sure that only competent people install your F1320D. They must ◊
be sufficiently earthed during and after the installation process.
Otherwise, electrostatic discharges may negatively affect the operating
characteristics of your equipment.
Specications5.
Output Power
RMS @ 1% THD 165 W @ 8 Ω
Peak power 200 W @ 8 Ω
Mic/Line Inputs
XLR connector
Sensitivity -50 dBu to 0 dBu
Impedance 20 kΩ balanced, 30 kΩ unbalanced
¼" TRS connector
Sensitivity -50 dBu to 0 dBu
Impedance 20 kΩ balanced, 30 kΩ unbalanced
Link Output
XLR connector
Equalizer
High 12 kHz / ±15 dB
Mid 2.5 kHz / ±15 dB
Low 80 Hz / ±15 dB
Feedback Filter
Filter frequency 350 Hz to 6 kHz
Level reduction max. 15 dB
Q factor 20
Loudspeaker System Data
Frequency range 60 Hz to 16 kHz (-10 dB)
Maximum sound pressure level 113 dB
Limiter optical
Power Supply/Voltage (Fuses)
USA/Canada 120 V~, 60 Hz (T 4.0 A H 250 V)
UK/Australia 240 V~, 50 Hz (T 2.0 A H 250 V)
Europe 230 V~, 50 Hz (T 2.0 A H 250 V)
Korea 220 V~, 60 Hz (T 2.0 A H 250 V)
China 220 V~, 50 Hz (T 2.0 A H 250 V)
Japan 100 V~, 50/60 Hz (T 4.0 A H 250 V)
Power consumption max. 300 Watts
Power supply switch mode
Mains connection standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D) appr. 14.2 x 22.8 x 16"
appr. 360 x 580 x 406 mm
Weight appr. 39.7 lbs / appr. 18 kg